Brushless Motor

Key Specifications/Special Features:

• Advise configure and usage limit
• Advise application power: 1,000W
• Momentary power: 1,200W maximum
• Propose configure for this motor:
  • Battery: 2,200mAh
  • ESC: 60A
  • Propeller: APC16X12
• Don't let the exiguous carbon steel metal to close with motor when fixing
• Breathe inside motor by magnetic field then cause the motor to set up or cause the winding short
• Please use the stainless steel screws when fix the motor and the length of the screw don't higher than the pedestal
• Motor temperature should not exceed 90 degrees Celsius
• Configuration characteristics:
  • Magnet: N38SH
  • Silicon steel: 0.35mm
  • Bearing: NMB
  • Shaft: carbon steel
  • Guide wind system: free cooling
  • Insulated material: somar epoxy (Japan)
• Reliability testing:
  • Test condition:
    • Voltage: 18.5V
    • Propeller: APC16X12
    • Load current: 50A
    • Net thrust: 2,850g
    • Room temperature: 25 degrees Celsius
    • Run mode: 5 minute ON and 2 minute OFF
    • Shaft direction gap: 0.05 to 0.2mm
    • Noise no load: 30dB
  • After testing 100 times circle:
    • Net thrust: 2,800g
    • Current: 52A
    • Temperature rising: 85 degrees Celsius
    • Shaft direction gap: 0.1 to 0.2mm
    • Run mode: 5 minute ON and 2 minute OFF
• Accessories: front prop holder, rear prop holder, cross motor mount, L motor mount and L stick motor mount

Delivery Details: